DO IT YOURSELF WHY NOT?

The Basics:

Tools:

To do it right. Do it fast.

You need an electric drill and electric screwdriver. You’ll need a level, asst. drill bits and asst. screws (generally #6 or #8 from 1 ¼” up to 3”.)

Always:

Pre-drill a hole slightly smaller than the screw you are about to use. This will keep wood from cracking and long screws from breaking when entering hard wood

Always wear eye protection!

Use your level on your gates hinge side or level the wood mount for the gates hinge side. This will keep the gate steady, not flying open or closed when in use.

With your level, make sure that the wood mount is not only straight up and down but also level also with the wall. This may take a small wood block at the top of the mount to make up for the space created by the molding on the bottom.

When Things Get Sticky:

When using ANY product requiring tape or double stick tape, the surface must be clean, degreased and dry. I like to use a light touch of rubbing alcohol espiecially on metal and glass surfaces.

Follow The Instructions:

Always read the manufacturers instructions thoroughly, then ask the coach when you have no idea what they mean.